Removing and replacing the front and rear bumper for Audi 80 and 90

You need to remove and replace front bumper Audi cars, models, 80 or 90? There’s nothing easier! Just read our instructions that detail tells you about what it is you need to do.

Therefore, the process of replacement will occur as follows:

To start the clear headlight designed for your car. After that, remove the tile casing, which is located under the engine and release the front part for arches on the right and left front wheels.

Remove the screws which are located under the bumper. They are designed for side mounting. Now release the clamps for attaching the bumper. Remove the two screws and the four retainer on the front bumper.

Now your bumper released. If you pull it, you can remove it from the machine. However, it is necessary to proceed very carefully and cautiously, to avoid unnecessary strain. Also not damage when removing the lining of your radiator.

you can now set a new bumper and secure it with the two sides fixers. Any further installation of the bumper will take place in reverse order.

In more detail the process you can see on the video.

Audi A4 front and rear bumper removed, just show the easiest way to remove the front and rear, Audi 80/90/Coupe Quattro/cabriolet discussion, remove the rear bumper cover installation, Pacifica, Quattro, and depth, remove, remove or replace.