Not working computer mouse

Not working computer mouse (PS/2, USB), what to do? Reasons, because what may not work for a computer mouse, quite a lot, but can be divided into 2 groups-both software and hardware. Software problems caused by the failure of malicious damage mouse driver, and the crash caused by erroneous behaviour, or damaged files.

Hardware-breaking one of the wires (usually break the wires next to the mouse), bad connection, and debris from falling into the body of the mouse, the mouse pour coffee, tea and so on.

Mouse does not work if you have just purchased, for example a USB mouse, stuck and it’s not working, cursor had died, the reason may be the lack of the necessary drivers in your Windows.

Examine all of the typical cases mentioned above. Can eliminate most breakdowns by the mouse itself, if you have at least a little skill to repair and diagnose your computer hardware.

So, if this is malware: it is necessary to clear your computer of viruses, if impossible-to restart it in safe mode (the button Delete or F2) and run the anti-virus scanner, so clean up your computer.

Did not help-reinstall virus force running mouse hurt it, if there is no driver-restore previous OS versions.

If the mouse is working fine and suddenly the cursor froze-no need to panic, just turn off and turn on the mouse connector, and sometimes hanging from a static, or restart your computer, using the “reset” button. There are also a variety of mechanical reasons, under his arm hit the object and close the laser.

If the mouse twitches, which are-may be caused by an open or broken wire. It is necessary to open the casing of the mouse and ohmmeter ping wire, if there is a cliff. During continuity wiggle the cord, and sometimes the only way to find out where the wire broke.

Well, there are the most common reasons, when you move a computer to a new note, and not confusing if you nest, PS/2 mouse with round connector and PS/2 keyboard? Nests are very similar and differ only by color. Mouse-keyboard-green, purple, you must also insert a row.

As a result of this keyboard pad and mouse does not work or stops.

As for the mouse is wireless, there may be the following reasons: the batteries are exhausted, and the receiver is out of order, bad driver and others.

Particular problems arise from mouse USB. The need for a USB mouse often arise when it is impossible to connect a PS/2 mouse, which disperse PS/2, or you gave people a good arm, and was with the USB plug.

Not all build Windows (the Windows install CD) and several drivers for the USB mouse, especially not on the old boards.

If the drivers are there, then plug the USB mouse is simple-insert the USB connector, the operating system detects the device, plug it in and displays a message that the USB mouse is ready to use.

Assemble retrofitted is not always possible, and this requires an in-depth knowledge of programming micro controllers. First, it is necessary to go into the BIOS and set the resolution to connect USB mouse. II. trying to find the driver on the Internet and install the mouse selector form. You need to restart the computer after this, sometimes helps.

USB mouse not working still? Another simple and reliable, but you will need the installation disk with the necessary drivers for us. Given any attempt to isolate the driver from there and install it on WINDU to lead, at least I did not succeed, but to update Windows with the CD the result. After the upgrade, so a system driver and USB mouse to work.

Of course, if you have purchased a 6 on the mouse button, all buttons will not work, and only the master, if necessary in addition to installing the driver this mouse model.

What could be the reason, when the mouse is not working? Attention should be paid to the mouse buttons and mouse wheel. Identifying problems with them, I think that the lack of work, but to find this size micro switch is more difficult. So don’t rush to throw your old mouse with a ball, and with them it is possible to get something for the parts: rope, a minibus, and sometimes the mouse wheel to fit.

Mouse buttons do not work more often than not due to the fact that the minibus Ballet, but that prevents dirt and dimensions. You only have to clean them.

If you remove the mouse connector, insert it and then refuse to work-reboot, so was updated. On some computers, it helps.

As you can see, to repair the computer mouse for yourself, and not too hard, at least in most cases.