Plastic pipes for water supply

Plastic pipes for water supply – At all times, progress is not in place and replace the old technologies come new , more advanced . This applies to absolutely all sectors and areas of building materials in particular. If recently , at the mention of water supply systems , did not occur anything other than steel pipe , now their place was taken by a more modern material , namely, plastic pipes for plumbing .

Construction materials on the market , they are relatively new , but has already established itself as the ” best of the best .” Of course this does not mean the irrevocable thing of the past pipes of steel and copper. Everyone understands that every material has its own pros and cons. In this article we will try to understand in more detail , it is good new developments in the field of water and what are their advantages over older materials.

With the common name ” of the polymer tube ” plastic tube is divided into several types , each of which is more suitable for certain types of papers . For example polyethylene pipes (PE) , are used for mounting internal and external water supply , drainage and sanitation are of two types : MPE ( high ) and HDPE ( low ) pressure . Depending on the type , the pressure is maintained at 10.6 atmospheres.

Pipe ( PEX ) plastic stitched , more durable and can withstand higher temperature , which makes them indispensable in the installation of under floor heating systems and ” snow melt .” PEX -AL- PEX or metal pipes have a special five-layer system , which can reduce the coefficient of linear expansion , which makes them able to withstand temperatures up to 95 degrees and up to 10 bar .

Finally pipe PVC (polyvinyl chloride ) . These tubes have appeared on the market and the very first in terms of price and quality, are still bestsellers .

Enumerating variety of polymer pipes , we can mention their positives. Plastic pipes for plumbing, easy to install and able to serve you for over 50 years . Due to its low thermal conductivity , they are widely used for heating and hot water. So they can be used in both open and closed systems , without fear that the pipes can rust . Polymers have anti corrosive properties .

The disadvantages include a few moments. First and most important – only limited plastic withstands temperature, which in some cases does not allow to use them in hot water and heating . The second – the inability to use fire-extinguishing systems . And the third – because of different methods of installation of plastic pipes may be some inconvenience.

After weighing the pros and cons, it’s safe to say that plastic pipes for water occupied a leading position in the market is well deserved and is easy to predict the future pictures . For their production, use special stamps polyethylene PE100 , PE80 and PE63 , allowing pipes have increased durability. They can withstand temperature extremes from -50 to +60 and can be used for plumbing and wiring for gas. In this case , the water passing through them does not change color and does not give a taste of iron, and through a wide range ( diameter pipes are produced from 16 to 630 mm ) , they find application at any stage of construction and decoration of the house.