do it yourself how to install a lock on a door

For sure you will know that all locks are nothing short of essential for the doors, not only at home, but also for example for offices and workplaces in General. There are various types and for all needs. One of the best ever and the most elegant at the same time that you can apply, are those to which cylinder has a unique design. step by step, useful tips on how to install in the best way a cylinder lock. It is a simpler process than you might think and you don’t take too long either. Remember that you will have at your disposal all the tools needed for this operation, including a drill.

The first thing you have to do, is to drill a hole for the cylinder, all this after marked its position using the mounting plate or, Alternatively, a mask, which sometimes comes from the dealer in paired with the lock. Thereafter, see cylinder and insert the washer into the hole, and then marks the spot where you should cut the connecting rod. Keep in mind that, in order to cut properly, you must absolutely use a hand saw.

how to install a lock on a door

At this point, you don’t need to do anything but screw the mounting plate, having marked the point at which they will put the screws, putting into place the same hotplate or the mask, practicing and then mask holes using a drill suitable. Once this is done, see to insert both the cylinder escutcheon, then make sure that the connecting bar to enter correctly into the grooved pin on the mounting plate.