Anti-vibration mat – when to put under the washing machine

Even the most modern washing machines, which are said to work silently, create vibration. What can we say about the old models. Their work is sometimes heard even with closed interior doors. Hence the main question that arises in almost everyone, how to get rid of this negative phenomenon. It’s not just about human comfort. Vibration over time can affect the integrity of the floor tile.

Causes of vibration and their elimination

The cause of the resulting vibration, most likely, should be sought not inside the car, but outside. And the technique itself may have absolutely nothing to do with it. But an uneven floor, differences in the upper tile layer can be the main consequence of vibration noise. It is the instability of the installed equipment that is most often the main reason for the appearance of a noise stimulus.

Regardless of the factor that turned out to be the reason why the washing machine creates a strong vibration when working, it is necessary to eliminate this problem. This must be done, because frequent fluctuations can lead to further serious problems. The belt of the drive, tank may break. Other parts can quickly become unusable.

What needs to be done? Of course, first of all, check the evenness of the installation of the machine. Perhaps it is not standing correctly, and everything is fine with the floor itself. It is possible that her legs were simply not adjusted during the initial installation. If after pinning, when turning on, no sounds occur, then the problem is solved.

However, as already stated in most cases, the reason lies in the unevenness of the floor. So it is necessary to carry out a small repair.

Importantly! Provided that the floor difference is small, it is not necessary to dismantle all the tiles for leveling and level the entire floor area. You can choose a separate area where the washing machine is located, and work specifically only with it. This will greatly save time and money, which is also important.

The surface is checked by level. A leveling screed is made and after drying, an even layer of tile is laid. Accordingly, the tile surface is also checked by level.

When should I install?

Now let’s move on to the consideration of additional elements that contribute to getting rid of vibrational sound. These are anti-vibration stands and mats.

Even if the technical device is installed evenly, this does not guarantee the quiet operation of the unit. The machine can “jump” in the workflow. Especially if it’s an outdated model. If this happens, the technique is additionally strengthened on an anti-vibration stand or by placing an anti-vibration mat under it.

Types of anti-vibration devices

On the market, the range of anti-vibration devices for washing machines is represented by two options: stands and mats of various models. They are made of different materials and, although they perform the same function, the quality of their work has differences.

Consider the first type of anti-vibration device. These are rubber stands. For their manufacture goes ordinary rubber or silicone. They play the role of additional legs installed under the equipment.

The stands have their own variety. It’s the paws. They look very original and attract with their appearance. Those who want to buy them will have to pay a little extra, because they are more expensive, but for the sake of attractiveness in the interior, many do not pay attention to this.

Now consider the second option, that is, anti-vibration mats. They are divided into two main types.

Rubber mats.
Silicone.

Many, with the fact that the vibration is slightly audible, however, still creates discomfort believe that it is not necessary to look for an expensive appropriate product. It is enough to purchase a simple inexpensive rubber mat, which will also successfully cope with the task of eliminating noise manifestations.

In this regard, it is worth considering the following:

When using a simple rubber coating (mat), the floor will be protected from damage, but the vibration will not disappear. It’s only going to go down a little bit.

The use of special anti-vibration mats, which are thicker and have a different structure, will create conditions for the complete absorption of vibrations.

Structure and principle of operation of the special mat

The mat, made for washing or other equipment that creates vibration, is endowed with basic functions, which are to smooth out the existing floor drops (if leveling was not carried out) and eliminate the vibrating of the machine. To perform these functions helps a special relief layer on the back of the product.

It is made of rubber. The internal structure of this material is a set of air bubbles. Thus, the polymeric material is supplied with good cushioning qualities, giving it the property of fully recovering in its original position after severe deformation under pressure.

Importantly! An anti-vibration mat is best placed under the machine along with its installation. This will prevent loosening. At the same time, the service life of the equipment will increase.

The sizes of the mats are different. Suitable parameters can be selected based on the size of the machine. In addition, in the range of such products there are types capable of withstanding low temperatures from -40C and high to +120C.

Advantages of the anti-vibration mat

A rubber anti-vibration mat, on which a washing machine or other unit that creates vibration is installed, has a number of advantages:

It allows you to smooth out small protrusions on the floor surface. The legs of the equipment are pressed against the surface. The mat fits snugly, there is a strong grip between the underside of the rubber and the floor. After installing the unit on it, any “movements” will become impossible.

The product perfectly dampens the resulting vibrations during the operation of the equipment.
Mats are very practical, long in use. On sale you can find any size.