How to solder plastic pipes and get reliable water supply

Modern repair of replacement of water supply and heating system is inconceivable without the use of plastic pipes. Rapidly breaking into the market of building materials at the end of the twentieth century, Polypropylene plastic pipes made a revolution in the history of the water supply and firmly occupied its leading position.

How to solder the plastic polypropylene pipes and replace them with his own hands we will describe in this article.

In the modern life of plastic pipes used absolutely in all spheres, increasingly becoming indispensable in the construction and repair of any scale due to their substantial advantages over other materials:

not subject to corrosion;
have high chemical resistance;
resistant to microorganisms;
have a low heat and sound conductivity;
light weight and convenience during transportation;
environmental;
easy to install;
suitable for external and hidden laying;
durable – warranty term for usage of 50 years subject to the right of the mode of use.

• Plastic pipes for water supply
• How to choose the right device for soldering of plastic pipes
• Installation of plastic pipes
• Plastic heating pipes
• Detectors buried wires metal wood and plastic pipes
• Soldering polypropylene pipes How to connect a pipe from polypropylene

Please note!

The correct mode: plastic pipes from polypropylene can withstand working pressure up to 15 bar at temperatures from 0 to 10 degrees and 2 bar at high temperatures (95 degrees).

Due to its nature, this type of pipe has been used successfully in hot and cold water supply and heating homes. And diversity of fittings with brass and chrome inserts allows you to easily combine with already existing reinforcement of steel and any pieces of plumbing.

Learn how to accurately trim the plastic tubing you will help video course: how to properly solder plastic pipes.

Necessary equipment

For the installation of the pipeline for water supply or heating used pipe outer diameter from 16 to 63 mm,.

For quality installation must be small:

Soldering iron with nozzles of different diameters.
How to choose a soldering iron to plastic pipes to the installation was quick and of high quality? Range large and diverse as the pricing policy.

Of great importance is the power of a soldering iron. For use in household conditions and pipe diameters 16-63 mm, sufficient will power – 1200 Watts. When the power of 1800 and more W performance soldering iron allows you to apply it in a professional activity. But a novice with little speed work this unit is not required.

Nozzles are heating elements and consist of a sleeve, the outer surface of the end of the pipe, inner surface transportation Bell connector details. Nozzles should be against prigarne teflon. Usually complete with soldering iron comes 6 nozzles of different diameters. It is more convenient to use the soldering iron with the possibility of installing not one but three nozzles. This will save considerable time when replacing the nozzles from one diameter to another, so to replace them it is necessary to cool the soldering iron and then heat.

Soldering iron professional series equipped with electronic temperature control system, control the heating of the nozzles with an accuracy of 1-5 degrees. You can get a model without a temperature control by buying a thermometer to measure the temperature.

It is important not to exceed the nozzle temperature of 260 degrees at which the spike of polypropylene, and 270 degrees plastic loses stability and overly, the tube will not go down into the fitting.

Using available heated parts can not achieve the necessary viscous diffusion and plasticity of the material will not happen. As a result, the unreliability of the connection.

The second essential tool for mounting is special scissors for plastic.
In addition, you will need a tape measure, pencil, canvas odds and ends, as well as most pipes and fittings required.

There are a few rules, how to use a soldering iron to plastic pipes

The soldering iron is set on a flat surface and special keys are fixed nozzles all required diameters. Closer to the edge of the installed nozzle needed for soldering directly to the wall.

All the separate pieces of the pipeline to better collect the permanently installed for polypropylene pipes. Compilation of individual fragments in a chain on the wall is necessary to carry out, with the participation of the Assistant.

Begin work necessary after the complete heating of the soldering iron (for polypropylene pipes-260 degrees), 10-15 minutes after switching on (see instructions to the unit).
A soldering iron should be enabled in the network during the whole time of work.
Heating of the two parts is carried out at the same time.

The remains of plastic with another hot nozzles removed immediately after each episode welding of polypropylene pipes cloth. Invalid cleaning cold nozzles.

Having no experience soldering of plastic pipes, make a couple of test compounds. To cut the pattern along the axis. It must be monolithic.

Be aware of the need to comply with the rules on accident prevention. After installation is conducted with the use of power tools, high temperatures and a plastic material, which when heated to high temperatures emit dangerous fumes.

• How to connect Pex-Al-Pex pipe
• How to make a quality bathroom renovation
• Protection of pipelines against corrosion of metal plumbing

How to properly solder polypropylene pipes. Will give you the right kind of advice: in order to get at least some experience soldering pipes of this type before you start laying the new water system in his apartment. Do you know how to solder, plastic pipe? To get high quality results, you need to smoothly cut the pipe. and reliably build in their home heating or water without the aid of a specialist. Today plastic pipes completely ousted from the market, to work with equipment, can easily change the plumbing yourself. and you are guaranteed to get a comfortable and reliable operation of your.