Cleaning the cooling system MacBook

Cleaning the cooling system MacBook – If your macbook overheats , then in order to avoid problems , it is necessary to carry out preventive cleaning laptop.

Cleaning the cooling system MacBook

Laptops MacBook Air or Pro – modern devices manufactured by the American company Apple. And the popularity of this brand of vehicles is increasing year by year. Therefore it is not surprising that the lucky owners of MacBook getting bigger. But with the increase in sales volumes and rising demand for services laptops. And one of the most important preventive measures is cleaning the cooling system MacBook.

How to understand that it is time to clean the MacBook ?

Clogging the cooling system is one of those defects, which to the eye is difficult to determine , therefore, experts strongly recommend not to wait until the art of building , and cleaned regularly and grate coolers . For current models enough to carry out such prevention once a year , although , of course, depends on operating conditions . For example, if you have the habit of working in bed or put your MacBook on a soft surface or if the apartment live pets, then the frequency of preventive cleaning will be approximately every six months.

It should be noted that regular cleaning of the cooling system – it’s not so much a recommendatory measure of how much a necessity. If it does not produce, then the blockage of the ventilation grilles or dirt on the blade will result in a cooler that MacBook starts to overheat . As a result, any member may simply burn out . According to statistics, the greatest harm overheating MacBook Air and Pro video card deals , but can also be damaged RAM and hard disk.

Basic rules of cleaning the cooling system MacBook

Open the notebook is possible only after it has been de-energized. If it is possible (not all models MacBook it is implemented ) , you need to remove the battery . Only then can you move on to other manipulations.

In order to get to the cooler , you need almost completely disassemble your laptop . When this is not enough to have a standard set of cross screwdrivers – still needed and special. It is worth noting that even remove the back cover layman is difficult. In addition , this operation requires the utmost accuracy as a false move or jerk may damage the loop between the keyboard and motherboard. To avoid damaging the laptop is not recommended to perform these steps manually .

After disabling the keyboard loop will need to be peeled off and disconnect the ribbon cable with connectors hard disk and remove it . Then, the same operation is carried out with an optical drive . Only after that the master will have access to coolers . Removing the fan, you will need to remove the screws and the dynamics matrix , disconnect the battery and lift the BIOS motherboard, also not forgetting the attachment . Beneath it is the cooling system , which runs alongside the three blocks . When you clean the cooling circuit of the three blocks , it is imperative to change the thermal paste . Once all the elements of the cooling system have been cleaned , replaced thermal paste and mounting coolers oiled , are ready to assemble MacBook.

Effectively clean the cooling system on the MacBook will only if a thorough knowledge of the architecture of the laptop. To the task wizard authorized service center .