Causes of car dents and the most effective ways to remove them

Of course, such defects do not decorate the car, and when they appear immediately arises a number of questions. For example, is it possible to remove dents on a car without painting, which is not cheap? In what cases in the restoration work is necessary to paint the car, and in which not? Is it possible to remove dents on the car without painting in order to save money? Let’s figure it out.

So, painting the dent of the car. Yes or no?

Before answering this question, it is important to understand what dents are. They can be conventionally divided into three main types. The first – small in size without violation of LCP, for example, from departing gravel, parking, often appearing on the ribs of rigidity, small in diameter, but quite deep, and so-called “refueling.” The second type includes damage of medium size, often complex form with chipped and local cracks. The third kind is the most complex, deep, with extensive chippings, halls and even damage to the hull.

Obviously, the greater the nature of the damage, the more complex and expensive repair. And, as practice shows, only a specialist in the conditions of the service station can assess the severity of the defect. He will give a verdict – to paint or not. Usually decisions about the need to paint the dent of the car are made in cases of violations of paint coating. Independent attempts to eliminate the dent of the car without painting, even the most insignificant, often fail. And unprofessional intervention, especially in difficult cases, usually only aggravates the situation.

Now that it has become clear that removing dents with or without a car’s painting depends on the degree of defect, you should know what effective ways to repair.

How to eliminate dents on the car without painting?
Special levers.

The method is that the tool through the near to the defect technical hole is put under the element of the car’s body at the place of the dent. Then the force is attached until the characteristic click, which indicates that the defect is eliminated.

Rdr

This technique is used to eliminate more complex dents by using a set of hooks. They have different shapes, lengths and angles of bend.

Just as in the previous case, the dent pulling is done by applying effort from within. However, the difficulty is that additionally requires the removal of cladding, some elements of the body, other components with possible heating of the work area and tapping of damaged metal at the edges.

There are also a number of ways to externally remove dents on the car without painting.

Pecking applicators

A special device – aglue applicator is fixed on the body with glue. After drying the adhesive composition, the master carefully applies the effort, pulling the dent. The last operation after successfully fixing the defect is cleaning the body of glue.

Vacuum suckers

The system is simple. The sucker is placed on a damaged place, then a vacuum is created and the metal is leveled. There are more complex systems with a vacuum-creating pump. Unlike applicators, there is no need for a laborious body cleaning after the use of the sucker.

Magnets

A small piece of cloth is placed under the device without lint and a magnet dent is stretched out. The magnet method allows small defects to be leveled.

Construction hairdryer

The method is based on the temperature difference. First, warm air heats up the damage, and then immediately cools with compressed air. In this way, good specialists can eliminate even complex dents. At the end of the work, the body is polished.

Punching

One of the commonly used methods that is used to eliminate both small and deep dents. The essence of it is that to the back of the deformed place is installed rubber substrate rubberized kiyankas with hooks of different shapes surface is tapped.

In cases of serious defects with damage to THE LKP, paint is used.
Currently, two ways of painting after the dents on the car, which get rid of the full painting of the car, are relevant.

1. Painting with a stain

This method allows you to paint only a deformed place with the preservation of native coating. The work is considered to be quite complex, requires professional skills and special equipment.

2. Local painting

It is used in cases of painting a large area after the damage has been repaired. This method, as well as the previous one, is a significant economy, and is carried out only in specialized paint workshops.

In conclusion, it should be noted that the real specialists- painters, able to cope with complex defects and give out after repair the car as a new, not so much. In practice, they usually work in specialized service stations, which offer services “removal of dents, repairs, painting cars.” In broad-based service pstov, all in a row, in these cases, experts do not recommend to apply.