Replacement glass window

Replacement glass window – Embossed or cracked window glass – is a nuisance that may face any . But to insert the new glass in the window is not so difficult , because replacement glass is considered minor repairs .

Replacing glass in a wooden box

As already mentioned , insert the new glass in a wooden frame windows are very simple. With this you can choose one of two ways to mount :
1. fastening of glass in the window using putty
2 . fastening of glass in the window using bead

steps:
If you need to replace a small glass of the work can be carried out without removing the frame hinges. But it is better to remove the sash windows and put it on a flat surface .

1. Remove the pieces of a broken window. When working with shrapnel recommend to wear gloves to avoid injury .
2 . Remove the old window putty, if previously used for fastening glass bead , remove all residues .
3 . Carefully strip the rebate if it rotted , strengthen its mastic or liquid resin .
4 . Make measurements for a new glass and cut it out.
5 . Install and secure the glass in the frame.

As already mentioned at this stage , you can use one of two options.

Fastening of glass in the window using putty
– With a spatula , apply a thin layer of putty on the flat side of the rebate , which will be laid on the glass. This creates a substrate , which provide waterproof box.

– Put the glass on the substrate and lightly press down around the perimeter , is down to him to putty. Spills should be cleaned . Fix glass using small nails without hats.

– Apply putty in the groove ( putty to become softer and more plastic necessarily mix it). Press the blade spatula to smooth the putty and create a bevel . Then flatten it at an angle of 45 degrees.

Note: Fuel putty depends on the depth of the rebate , but on average , banks putty mass of 500 grams is enough to set the window size of 1 × 0,5 m If the color of putty is not in harmony with the color of the window frame it can be painted , but before painting and have it well dry for a few days.

 replacement window How to repair glass

Fastening of glass in the window using bead
– Measure and cut beadings , size exactly match the window opening .
– Apply a thin layer of sealant around the perimeter of the rebate (no more than 1/3 of its depth ) .
– Carefully place the glass and press to ensure tightness .
– Pressed tightly against the glass beadings ( if you do not rattle and glass will miss the cold ) and nailed into place. Retractable cap studs in wood.
– If somewhere made ​​sealant erase it. Window is ready .

Replacing glass in a plastic box

Replace the glass in a plastic box, a little more difficult, but it can also be done by hand without reference to the masters of the manufacturer. Especially the new glass insert themselves will cost a lot cheaper than a challenge to master . The principle of replacing the glass in all the windows of plastic about the same.

steps:
1. Get a spare set of sealed
2 . Remove the remnants of broken glass , thus preparing the way for the new .
3 . Since glass fixing system for plastic windows are different, try to follow the instructions of your manufacturer.
4 . On the lower surface of the lower seam put lining (depending on the type of window linings may need two or more).
5 . Window set on the pad and insert it into the seam . Be careful and cautious not to accidentally crush the seal around the glass unit.
6. To secure the glass perimeter set clamps and gaskets .

Congratulations to the new window is ready !

Now you know how you can replace the windows .
I think for you will not be difficult when you need to perform such repairs.

Replacement ,glass, window,plastic window insulation ,window plastic ,lastic for windows ,plastic window well covers ,plastic window boxes ,plastic window covering ,plastic window ,plastic window shutters ,plastic window box liners