Measurers or installers who assess the cost of installing a split system will tell you the best option for installing an air conditioner inexpensively and reliably. When installing an air conditioner in a room in which major repairs are carried out, the installation is carried out in two stages. At the first stage, the air conditioner route is laid, which includes two copper tubes, a drainage pipe and a signal cable connecting the external and indoor units. The track is laid in a strobe in the wall, if necessary at an angle for drainage.
At this stage, it is not even necessary to have air conditioning units available, they can be bought later, but it is worth considering the requirements of the blocks for the diameter of copper pipes and the number of wires of the inter block cable. Plan your purchase in advance and coordinate the model with the installers. If there is an air conditioner at this stage, the outdoor unit of the split system is installed. Further, the tubes inside the room are blocked to protect against dirt and dust getting inside. At this point, the first stage of installation of the air conditioner ends. Master finishers seal the strobe along with the track.
The second stage of installation of the air conditioner is the installation of the indoor unit. By this stage, the wallpaper should already be pasted. The board of the indoor unit of the air conditioner is installed on them, the block itself is hung, the pipes are rolled, the inter-block and power cables are connected. Further, the installers perform commissioning works – vacuuming the system, starting freon from the external unit, trial start and adjustment of the air conditioner.