Garage ventilation residential garage ventilation systems

The ventilation system of the garage can be arranged in a variety of ways. In the case when the garage is not heated, it is enough to organize a natural exhaust ventilation. If the garage room in the cold period is heated, then more increased air exchange, i.e. the arrangement of forced ventilation.

In addition, increased ventilation is required for those garages that are built into residential buildings. This is explained not only by the fact that it is necessary to maintain the required level of temperature and humidity, but also by the fact that it is necessary to eliminate any undesirable odors that do not want to get inside the living quarters. Most likely, in this case will have to equip the whole ventilation system.

The most simple and common system of ventilation of the garage space is the above-mentioned natural exhaust system.

If your garage is combined with a cellar, then you need to create a joint ventilation system.

Plastic pipes for the installation of exhaust ventilation

The exhaust ventilation in the garage For the installation of exhaust ventilation is allowed to use conventional sewer plastic pipes. At the same time, the milk pipe should be placed as close as possible to the floor of the garage (no more than 20 centimeters from its surface).

Accordingly, the exhaust pipe should be located as close as possible to the ceiling surface. The level of the exhaust pipe height should exceed the level of the roof of the garage. In addition, on the end of this pipe should install a deflector (ventilation turbine or voller).

If the garage is heated, then this scheme should be amended: additionally install an exhaust fan. Naturally, it must be connected to the exhaust pipe or installed inside this pipe – it all depends on the design of the fan.

Video. Dirt Cheap Shop Garage Ventilation System | DIY |