Features application of electromagnetic valves

Over recent years, increasingly relevant is the use of different energy efficiency technologies and devices that allow you to provide easy management of all communication systems of the home, as well as significantly save. So, gradually expanding the scope of application of electromagnetic valves for radiators, which increases the performance of the heating system and reduce the cost of its operation and maintenance.

Modern manufacturers offered quite a large number of different valves, so the choice is big enough. In order to find exactly what you want, the consumer must first determine the purpose for which the selected device, indicate the basic characteristics of the valve, to take into account various factors and know about problems that may occur during operation due to incorrectly mounted system or improper selection of the device itself.

Solenoid valve-a device that when filing or a power outage could open and close the entrance section of the valve. This device can be designed for efficient management of flows of water, air, steam, gas-any liquid and gas. Choosing a valve, it is necessary to pay attention to where it will be used and what characteristics are most important.

Direct action valve opens or closes the entrance cross section through the direct influence of the core. Control valve (valve indirect action) is intended for a larger pipeline line and significantly more pressure, since it reinforces the direct action using pressure working environment for the opening of the larger, walk-through sections with preservation of the small size of the electromagnet. Normally closed valve opens when power is on and closes when power is turned off. Normally open valve operates in reverse order.

Features of application of electromagnetic valves are determined and the construction of the device. Yes, solenoid valve has one intake and one exhaust pipe connection and can be normally open or normally closed. Three-way valve has three connections and two through intersections and can be normally open, normally closed, as well as versatile use as open and as closed. Often this type of valve is used in heating, but in different systems, dilution and pressure distribution valves in cylinder one-sided action, the grounds of automatic control.

Electromagnetic valves nowadays is a very effective means for effecting automatic control of flow of many liquids, gases. When using the valve can be limited to a minimum of piping works, works on installation of wiring, reduce costs and effort not only to install and service, providing long term operation of the entire system.