Design motifs in plaster and wet plaster to walls

Decorative design work of plaster and wet plaster gives beauty to each House, using plaster as finishing home, has come not long ago in our lives. However, in such a short period of time, the plaster is one of the most important and popular materials for finishing. The reasons for this lie in the following:

Has a wide range of options that allow you to convert the walls like this or relationship with any other materials, finishing materials (wallpaper, paint, stone, etc.).
Has some originality, making totally smooth and rough surface.
Completely environmentally friendly and safe. Does not stain, does not lose its color during operation.

He has many other benefits.
But, as with the other end to your room elegant look, you need to perform the inside lining the walls properly. In fact, about how exactly to do that, we will discuss in this article.

Interior painting and decorating technology

Therefore, for plaster decorative please you for many years, must be installed in accordance with the following: ‘s

Stage of preparation of the work surface. At this stage, it is necessary to first clean the work surface of the old liner. It is very important to try to remove all the bumps and washes away the remainder of construction dust. If we decorate the walls, for example, bathrooms, where humidity level is too high, regardless of the material of the walls should be soaked in antifungal impregnation. After that, stuck on the walls wemabi. The surface must be completely dry and only then can we start at the end.

Step applying the mixture. To apply the grout, and use a spoon. The mixture should be applied so as to return the marble particles across the surface of the plaster, leaving traces. Accordingly, it must be the plaster layer thickness of at least 3 mm (could be more), otherwise you will not be able to decorate your walls, decorate them with graphics or relief. Also, the work process, if you can not perform every time, you have to break it into stages. This means that the individual sections of the wall must be the glue to hide the Ribbon, and then moved to another area of work.

Decoration phase. This phase is considered to be one of the hardest. Here, you must use a tool such as a plastic float. At the same time, make sure that the surface is still not completely dry. The most important thing that is required of you is to choose the direction of movement of the float (might be inclined, circular, horizontal, vertical, other forms), as well as the intensity of the force that will make. Only with this approach you can make grooves possible asymmetric arranged in relation to each other, which will give your business the best decorative color.

This article summarizes, we note that the final phase of the work, and this step is drying. So, at this point I would advise against the work surface from leakage of water and direct sunlight. To do this, close all Windows and doors, as well as to maintain the room temperature is not less than 30 °.

Also, it should be noted that after the decorating and drying of the surface, you must use the painting, the only natural materials are safe for health. An example of good lines may be a transparent glaze finish, which can be played the next day.

How to repair cracks and defects on the plaster work

Gypsum is a soft and beautiful “fragile”. As a result of vibration or slight depressions in the ground, and the wall is “work”, which can cause cracks in the plaster layer. It can also scratch easily and holes created by children, for example when playing for or impact.

The plaster cracks work may be caused by faulty mixes. The materials used are cement, lime and powder debris. This, when it is mixed wrong leads to bonding on the wall to be weak. This will cause a hollow space between the wall and finishing. The implications of this are that the end will come off the wall. It can also cause defects other building structure during settlement. These cracks appear on the wall surface of the beam.

Such damages are clearly not as nice, but what will you do? Plastering wall full of specialized function is to talk to real could have been glued. On the reform of working plaster first. Work surface, add one extra. This will ensure more space and easier connectivity to the existing surface. After penetration, wetted, and plaster. It starts by applying one coat of rough plaster. This should be in the form of mud. Next coat finish with mortar is very moist. And use the straight edge to clear off the excess mortar. Then put the wood surface.

How long does it take to wet plaster drying time

Bathrooms and kitchens are a great place to experience this new technology. Use as a backsplash treatment around the pelvic area and then seal with polyurethane clear, non-yellowing protection from moisture. Trying to create a pattern of scrolls with items or create diamonds, triangles or squares. Try pattern of ideas on a flat surface before putting on the wall. Wall stickers are all the rage in today’s decorating. You see, in the form of plaster decoration of Venice in the home decorating shows and magazines, in gypsum and plaster decoration effects printing stenciling. It’s everywhere.

Often found that finishing building, painting an apartment renovation work within facilities poses many problems and work out. It results from the fact that water is an element commonly used mortar shells, paint or concrete. Unfortunately, it is very difficult to remove excess water from the areas renovated in autumn/winter. Flooring or walls moist to prevent subsequent work, which causes delay in the realization of the entire project. In such cases it is necessary either to heat the area extensively and ventilation at the same time, eliminate the use of dehumidifiers.

It needs to remember that the room where he is going to work must be closed to avoid the flow of moist air from the outside. Dehumidifier should not be too close to the walls, and this may reduce efficiency due to air flow obstruction. It is placed in the middle of the room, 20-50 cm from walls or any other obstacles. Best effects can be achieved with this method. It needs to remember that these devices may not be used when the room temperature is too low (below 5 ° c). Drying time through these devices is from several hours to several days. It all depends on the temperature and the capacity of the room, the humidity level and the capacity of the dryer.