3D printing Wide applications and spread in the West

3D printing. Wide applications and spread in the West Specialized media has recently marked 3D printing technology and areas of use, take a look at this overview shows the timeline of this revolutionary technology. “What if you fail a mission into space due to diffraction or loss of a simple equipment?” this question.

Specialized media has recently marked 3D printing technology and areas of use, take a look at this overview shows the timeline of this revolutionary technology.

“What if you fail a mission into space due to diffraction or loss of a simple equipment?” this question of a dozen questions that prompted the making of 3D printers where a simple solution to get the “screwdriver” or valves with certain sizes.

The idea of 3D printing on the use of materials such as plastic or molten liquid resin and UV radiation to create reusable models.

MULTIPLE DOMAINS

And 3D printing in areas such as the manufacture of accessories and toys and some auto parts as well as been used for the manufacture of medical prosthesis, and soon will turn these print characters and cartoons and characters of video games to realistic characters.

And computer scientists invented at Harvard University program to clear characters and cartoons and video games figures to be accurate positioning of joints and those characters before converting to the 3D printer for the personal surround.

Method of work

Printers working 3D models after receiving the results of the survey of the 3-d Stereogram to print on materials such as plastic and resin infusion and even wood in horizontal layers and then leave to cool and harden and is then dried using UV.

Surround is divided into several segments to be making a single slide in a time before those slides are assembled in layers on the base plate to surround comes out in final form to the user.

The cost varies per course depending on the size of the desired surround Edition and as consumption of basic materials such as plastic or resin, the material that was provided on a commercial scale from 50 to 100 dollars a kilo.

Proliferation challenges

And started the idea of using 3D printers to print customized things hugely broad general consumers in the world, especially the printing technique that gave freedom to the consumer to choose what they want and convert it to something concrete can be used.

And Portabee printer company is the cheapest of its kind in the field of 3D printing compared to 480 US dollars only, which can increase the proliferation of those types of printers among ordinary consumers.

However, before that, a number of technical challenges, such as the difficulty of 3D scanning to complex models that need for attention to detail in order to exit a coherent and non-anthropomorphic warped and another such as low quality of some models and fragility, which doesn’t make it a process or suitable for long-term consumption.

Despite the new 3D-printers like those produced by 3D systems-work through special application can be downloaded on mobile phones, and use it to print the desired models and are available for a reasonable price is $ 1,300, but there are other problems facing the quality of printing.

Other problems facing the 3D printing so far are the high rate of failure, of course, whether because of the fall in the round on base plate installed during configuration of layers other than the length of the process for obtaining stereoscopic one through relatively inexpensive printers that have started to invade the market.

Practical experiences

And for the technical experience and effectiveness of the national geographic network in collaboration with Z Corporation printer manufacturer for one of those 3D industry “screwdriver” after wiping using a 3D scanner works with IR and its idea on the same idea of a “special” Microsoft kinect sensor.

The experiment succeeded in making “screwdriver” heart unable to unpack and install the bolts, but the eye-catching is the multiplicity of the stages necessary for making this “screwdriver” from anointed first and then put it on the printer and wait out the round and placed in a special oven-UV factor-to ensure its hardness.

Industry leaders hope the 3D printers to overcome all those selection in the near future, especially as applications based on such printers cannot be forecast, it is left to the imagination of developers and designers.

I give the Harvard laboratory of small robots for 3D printing applications at a glance ahead of when developing such industry, where hybrid printers has been developed in the laboratory combine 3D printing and the manufacture of electrical circuits and high-sensitivity to manufacturing precision components for the out enhance industry robots.

And the famous American University Lab has encountered a minor problem which required manual intervention is the need to provide robots from those printers with chips and batteries.

Some designers also make the experience of the first aircraft manufactured by 3D printing, a plane that had flown successfully for ten minutes, the video shows the next stage of making the experience of that plane.

And one of the most fascinating applications of 3D printing is a lively House “scenes” that is configured on the figure 8 slant, this House is composed of material is manufactured using a 3D printer called D-Shape so that the processing of statues by German architect “yaniab roisnar” through the use of sand and special merge material to create a structure to house the strength and durability comparable to the strength of the cement.

The building is made using 3D printing

3D printing. Wide applications and spread in the West
Western attention
The most visible signs of the importance of 3D printing in the future is the work of giants such as Boeing and GE, Ford, Samsung and Canon to develop the technique described by the Technical Advisory Committee of experts for the u.s. President Barack Obama as one of the most popular technological tendencies in the future.

Unlike the US interest in those print entered China as a major industrial power plans to invest in 3D printing technology invented locally in order to increase their productivity.

The question remains, “what is the store for us in the coming days in the area of 3D printers.