Ultrasonic BAKU 9050

 Ultrasonic BAKU 9050 designed for intensive gentle cleaning objects in a liquid medium under the action of ultrasonic waves held grout .

As the cleaning solutions can be used: Drinking water, distilled water , weak acid and alkaline solutions , solvents and other chemicals . In that case, if the cleaning solution is caustic , toxic  – using an ultrasonic bath covered metal cover.

The use of ultrasonic baths

Ultrasonic cleaners can be used in jewelry and watchmaking , for cleaning electronic components, pharmacology , archeology, medicine and everyday life .

principle of operation

The principle of operation is based on an ultrasonic bath evenly over the surface of the mechanical action of the sound waves of high frequency, for , as a conductor which serves an incompressible medium .

The most simple , affordable and safe cleaning solution is a mixture of warm tap water with a small amount of household detergents.

If you use dish detergent , with a small interval of time of the bath , you are guaranteed to clean and do not damage the object .

To clean gold, silver and copper products in aqueous solution may be to add a small amount of acetic or citric acid. Purifying copper, should closely monitor cleaning time . Prolonged exposure to acid can damage the object .

To remove items from iron oxides , carbon alloys , citric acid can be used , selecting the duration of treatment depends on the thickness of the oxide layer .

Features ultrasonic bath BAKU 9050

– Two modes of power : 30 W and 50 W

– The maximum capacity at the level of the more expensive models

– Easy timer in minutes ( in contrast to many models where time is in seconds )

– The duration of the timer 60 and 30 minutes depending on the power

– Ample working capacity , with compact dimensions

Ultrasonic BAKU 9050 instruction

Place the tub on a hard surface , put in a working capacity of the items that need to be cleaned. In some cases, such as for coins found in the ground, can be poured on top of them a small amount of detergent, and only after a while to fill the tank with water .

Fill the container with water : You can use both cold and hot water. In an ultrasonic bath in a network , choose the power by pressing the 30w or 50w, after clicking on the displayed number “1” indicating the duration of 1 minute brushing , click and hold the «50w» to set the cleaning time ( 30 min) , after installation press the ” 0 / I». To switch to a different mode or stop working , go to another mode of power.

Ultrasonic BAKU 9050 In the category Technology Many people are interested in knowledge and learning about many subjects, this knowledge may be vital at some point in your life, attention enough, and dive into more detail more articles and learn more information about Ultrasonic BAKU 9050.