how to repair delta shower faucet leak

To carry out repair work on any of the types of switches, you need to be able to properly disassemble each of them. Before starting work with any of the faucets, it is necessary to block the water in the entire apartment.

Disassembling a switch

Sometimes there is a need to disassemble the switch. To date, the spool type is not very popular. Therefore, it is now quite difficult to find parts for its repair. It is easier to buy a more modern faucet and install it.

If you decide to leave your old switch, repairing it, you need to do it according to the scheme:

With the help of an adjustable wrench, you need to separate the lower part of the case from the other part.

You need to remove the nut-lock, separating the hose and the switch.

Then you need to separately remove the switch itself.

Here, the scheme of actions for analyzing the cork analogue consists of several points:

First you need to remove the outer decorative part of the mixer.
Using an adjustable wrench, it is necessary to unscrew the locking nuts.
Then you need to carefully pull out the switch itself.
The next step is to dismantle the plastic washer that holds the spring, then remove the spring itself.
After the work is completed, the assembly takes place in reverse order.

The sequence of actions for disassembling the ball analogue consists of several steps:

First you need to remove the mounting nut with a flat screwdriver.
Then it is necessary to remove the special plate.
After that, you should remove the handles, and then remove the retainers from under them.
After these actions, you can easily remove the rod and repair it.