corrugated metal fence panels metal fence posts

How to make a metal fence, Fences made of corrugated board has recently enjoyed a great popularity. This material is characterized by high reliability, but it is quite economical. In addition, it is very easy to operate and carry out his erection. Metal fences, made of corrugated board, provide a high degree of protection from loud noises.

Build a fence of corrugated board is quite possible on their own. For a start you need to dig pits small size, using a shovel. The depth of the pits should be about two feet, and its diameter is 30 x 30 mm. If the type of soil allows, pits can be done using a hand drill.

In the pits ready to the inserted pipe, after which they align vertically strictly according to the level of this be sure to securely lock the tube in the correct position. After that you can fill the holes with established in them the pipes with concrete. The pillars can be special profiled pipe, the thickness of which is 2-3 mm, and the intersection is equal to 60×60 mm. The easiest way to install profiled pipe fence of corrugated board. If, however, the columns will be used for the fence, which will be the gate, then their intersection is increased to 100 x 100 mm. Watch: concrete must freeze well. Only after full hardening of the concrete to the posts, you can attach the welded girders with jumpers, made of steel. As a rule, their intersection is equal to 40×20 mm. Don’t forget to cover the paint design that came out.

Corrugated Metal Privacy Fence Construction Review

A ready-made frame mounted profiled. For this to the horizontal purlins attached sheets of corrugated board. It is necessary to use special screws for metal or rivets. Installation of a fence of corrugated board is carried out in a short time, as sheets of corrugated board is pretty light and large.

If during the operation of one or more sections of fence will be damaged, then they can be easily replaced with new, previously the old worn out elements of the design. If the letters were kept on the screws, then they need to unscrew, mount the new sheet, and then screw them back. All this work will go no longer than twenty minutes, but the fence will look like new.