BOSCH GMS 120 Professional

Professional detector will find it! The best among the professional – BOSCH GMS 120 Professional

Very often it is necessary to check the wooden beams and metal structures located behind an opaque fence. A person can not see through the wall, and then there’s only one way out – dismantling .

Currently, however, there were devices that can ” see ” the location hidden behind the wall structure or electrical cable . If the harness is located under the plaster , the drilling is always a chance to get in this place , and as a result – a short circuit.

Professional detectors are precisely intended to detect concealed electrical wiring, metal and wooden beams without tearing down walls . Detector Bosch gms embodies the best of designers and manufacturers. Its reliability and practicality is simply amazing and is easy to operate and requires no manual calibration , it is automatic. This electronic device is able to detect a wooden beam to a depth of 38 mm . Device submits thus beep. Besides, the front of the detector will be a light ring . This dual notification will see and hear even the scattered people …

Detector Bosch GMS 120 Professional can operate in three modes:

1.Obnaruzhenie enclosed structures;
2.Obnaruzhenie metal;
3 . Search for electric cable .

The device is equipped with 9 V battery , carrying case and wrist strap .

If you need to work safely and without undue pressure to move the Bosch GMS 120 on the plane. The contact strips are located on the back of the unit must be constantly in contact with the sample surface , it’s ” eyes and ears” of the detector. Special scale «CENTER», located on the display allows you to more accurately calculate the location of the object. In the body of the detector there is a through hole through which one can make a pencil mark .

Undoubtedly , this device will be useful to people involved with the installation and repair of electrical wiring. One can always find a spot break an electrical circuit , without resorting to more complex methods of diagnosis . The detector is easy to hold in his hand , his body is not slippery and ergonomic . The device is able to determine steel to a depth of 120 mm (the maximum ), copper – 80 mm, electric wires – 50 mm.

Bosch gms detector identifies all objects that differ from the one surface on which moves (wall, ceiling , paneling , etc.), it is on this principle, working and all similar devices . To detect hidden wiring advisable to apply for it to connect any voltage and load.

Then the search process easier , the detector will look exactly cable that was put electric current , and not de-energized copper wire . By the way, under voltage wiring is always displayed regardless of the mode selected. The detector is simple to operate, has a total of 6 buttons . He certainly should be in the arsenal of any wizard or builder.