How to fasten shutters – On how it attached to the window blinds depends the reliability of their operation. That’s why you need to know how to properly fasten shutters . Fixation should be as accurate as possible , and being careful not to damage the screen and does not spoil yourself blinds.
Venetian blind fastened to a window by means of three different methods:
1. Mount into the window opening . For such a fixing method , the width was smaller than the width of the louver opening windows on both sides of two centimeters . Height shutters need to do two centimeters below the height of the window opening. When attaching the need to leave a gap between the blinds and the top edge of the window. Attached in this way blinds allow freely open window .
Shutters on windows beauty and protection
2 . Fixing out of the window opening . With this method it is possible to close a sufficiently large portion of the window . The width of the blinds with this method of attachment shall be wider than the window opening on each side by five centimeters . Height exceed the height of the opening ten centimeters .
3 . Mounted on each flap separately. By width of blinds, in this case , must be on both sides of an inch more than the glass. Blinds are attached separately to each casement .
Before you mount blinds need to partition . Fasteners shutters attached to places markup with screws and dowels . Hung on fixing cornice , and it put runners plates. After installation, you need to check how well all mechanisms .
Shutters Characteristics and types
The shutters protect glass windows from outside influence, and also has a decorative and functional purpose. Today, the shutters can be installed not only in country houses , they can also be found in a residential area .
There are several types of shutters :
1. Plastic shutters or louvered shutters. This type of shutters made of horizontal panels on both sides. Wheel fixed inside the opening and fastened by bolts to strong metal sidewalls . The outer part of the valves tightly adjacent to the walls of the house . Versatility plastic shutters is their ability to be fixed to any reason , be it wood, metal , brick, concrete, etc.
2 . Wooden shutters. The main advantage of wooden shutters – their decorative appeal . This type of shutter is more suitable for use in suburban homes . Wooden shutters are mostly collected from the rail or wainscot . The inside of the shutters and reinforced wooden slats and fastened on the outside of the loop for further installation on the window frame . After the installation of wooden shutters they can be treated with stain . As a decorative wood shutters can be a variety of different trims and metallic elements.
new build or rebuild an old wooden house
3 . Roller blinds are made of fabrics that are assembled from steel plates . Basically webs made of metal – aluminum or steel, and therefore have high durability. Steel shutters are often used in commercial and office buildings , aluminum shutters – in residential areas.
4 . The metal shutters . The main function of these shutters is the protection from unpleasant factors, such as hacking , exposure to direct sunlight or weather . Metal shutters are generally made of thin sheet iron , and stainless steel. This type of shutters are commonly used in suburban or suburban areas , to protect the windows from frost and cold winds.
5 . Paper shutters can be made independently . This kind of puts more considered as a decorative element in the room. In the manufacture of this type of shutters used thick parchment , which is nailed to a wooden frame .
When choosing a particular type of shutters must abide to the rule should be selected such shutters for the windows , which correspond to the shape and size of windows, interior room , the windows combined with the interior decoration of the room.
Comments
Post a Comment