Many in the conditions of the apartment prefer to have a cat, which does not need to walk on the street and which is easier to care for. At the same time cats can spoil not only furniture, but also walls, as one of the basic instincts is to sharpen claws. Animals use for this purpose upholstery doors, protruding corners, but most often suffers it is soft furniture. Cat cnometers with their own hands are considered an effective way to help save the situation.
Why you need a cat cone and why animals spoil surfaces
No matter how cute the domestic cat may seem, still initially the animal belonged to the wild, so many instincts are preserved in domestic individuals. Even cats that live permanently in the apartment, but for some reason get on the street, in danger of trying to climb a tree or any other high-lying surface. Street cats use claws not only for climbing, but also for hunting for prey. It is the sharp claws that allow the animal to cling to another animal with a dead grip.
Cat claw the main way to protect the surfaces in the house
It’s interesting! Recently, among the owners of cats has become popular operation “soft paws”, which is the complete removal of the nail phalanx. However, most veterinarians are categorically against such manipulations, because after it the animal, in fact, becomes disabled. The complete removal of cbuties can be compared to the amputation of fingers in humans.
The claw itself is considered a sensitive element, the surface of which is constantly updated. A person has the ability to cut his nails as they grow, and the animal removes the keratinized layer, using any suitable surface, whether it is the trunk or the roots of the tree. As for wildlife, when clawing, members of the cat family secrete special substances that leave the smell on the surface. This method is considered one of the options that allows the animal to mark the territory.
The cat, constantly living at home, does not have the ability to grind claws on the hard surface of asphalt or wood, so in the absence of a scratch for the cat animal for this purpose will apply any surfaces it likes. If the cat does not offer an alternative, it may well come to the point that you have to change the upholstery of furniture or paste wallpaper.
What requirements should meet the cnome for cats with their own hands
Before you make a claw for the cat with your own hands, you need to know what requirements should meet the design:
Durable. In order for the cat to be able to easily remove the keratinized layer, the product should be hard in the first place, but not excessively, because it is quite easy to damage the claws.
Rough and fibrous. The material used for the tightening should not be easily torn, otherwise there is a possibility that the animal will get confused.
Unelectrifying. If the surface will be electrified, most likely, the pet will not apply the design as intended. Fluffy pets are considered to be especially sensitive to static toks.
In general, we can say that the ideal cgteredka for the cat should be made of natural materials, among which the most popular are:
A tree
stump rope;
A burlap;
Dense cardboard
quality natural fabrics.
It is not recommended to buy synthetic materials when making their own houses for cats with a claw, because they are often excessively strong, which can lead to the complete loss of claw during cleaning.
Very important! When creating a sharpener for cats’ coils categorically do not recommend as a fastener to use self-cutters with large hats or stapler staplers, because they often cause the hair and cones to be ripped out.
What to make a claw with your own hands and what materials it is better not to use
Due to the fact that cats are overly sensitive to smells, recommend cat cnometers to make it from natural materials that do not have a strong aroma. In general, in order not to lose, you should watch the pet, which by his behavior can tell what material he likes more.
Some cats like to use cardboard boxes as a sharpener, others prefer carpets or surfaces of soft furniture. Therefore, one will be suitable homemade options from cardboard, and the second as an alternative can be offered a jute or sisa-proof rope, and in this case will be useful carpet. But to sway the structures with synthetic ropes is not recommended for such reasons:
a sharp smell that can scare off the animal;
Fast wear
unsafe composition.
As for the last moment, at first glance, it does not seem to be a problem, because the product is used only for cleaning cones. However, it should be taken into account that pieces of material will inevitably fall under the claws, which the cat licks with his tongue. This is how plastic will penetrate the body of the pet, which is unlikely to positively affect his health. Often the constant influence of plastic and synthetic dyes on the body becomes the cause of the development of gastrointestinal pathologies, respiratory diseases. Some experts associate the constant intake of synthetics in the animal’s body with the formation of tumors.
Many owners note that their animals prefer to sharpen their claws on wooden surfaces. In this case, a strong healthy and straight-layered tree will be suitable for the making of the cone. Of the hardwoods, the most successful option is birch, and from conifers fit any tree except spruce.
If it was decided to make with their own hands a claw for a cat made of wood, you need to make sure that the material was well dried and weathered. Keep the blanks for work should be on the street until the smell disappears. The readiness for use is evidenced by the change in color to gray, and the coniferous trees have layered.
It’s interesting! If the tree intended for work has a small yellow plaque, should not be frightened, because it is most likely lichen, which is considered harmless and will not cause harm to the tail.
Some prefer to minimize efforts and just bring the animal part of the trunk of the cut tree, the so-called chook, and the cat is delighted with it. Of course, the installation will have to allocate a section of the room, but there is no need to build an additional stand or platform. It is important to choose such variants of tree fragments, so that they have a free from the tuks area, equal to the growth of the animal standing on the hind legs.
What else to consider when creating a cone with your own hands
If you want to save is quite permissible as a cegtedral just to take a board, but the animal much more to the liking will have a high bed, equipped with a place to sharpen. Most cats prefer to spend time on the hill, because from there opens the view on everything that happens. Each cat owner drew attention to the fact that the favorite place of the pet can be a window sill, which overlooks the street.
There is also the opposite point of view. Some experts argue that it is not necessary to combine clogs with houses, because animals prefer not to leave their own marks near the lair. Among other things, before you make a claw for the cat, you need to take into account other parameters that should fit the design:
Stability. It is important to take into account that during the jump the animal exerts a load 2-3 times higher than its weight, so the product should be designed for this. Otherwise, if the cat falls, there is a possibility that it will no longer use this claw.
It’s the right size. The claw should not occupy the lion’s share of the area of the room where it is installed. It is best to place the device in a small room in a corner or in another place where it will not interfere. If you allow the size of the house, you can create a large cat house with a claw with their own hands.
Durability. The material must withstand claws, tribification and constant exposure to teeth.
Attractiveness. The design should become a full-fledged element of the interior, so it should be combined with the rest of the items in the room.
The main types of ctools for cats: photos of different options
The cleft-column for cats is considered the most common option suitable for self-manufacturing. The product is a vertical column wrapped around the perimeter of the selected material. As for classification, the designs are divided into such types:
Outdoor;
Suspended;
Corner;
In the form of a mat;
ring-shaped.
The clawpoints, designed to be attached to the wall, are flat boards, securely fixed on the surface. If you look at the photo claw, you can notice that the product is fixed in the place where the animal prefers to stretch (it is easy to notice on the wallpaper). Sisal or jute is used for winding. The main advantages of installing a wall cone:
Takes up a minimum of space indoors.
You can install anywhere.
There is no chance of tipping over.
it is easy to make on its own.
Useful information! Wall claws are popular because they perform an aesthetic function in the apartment: it is similar products will be able to close the spoiled site of wallpaper.
Another important advantage of the wall option is that the product is suitable for installation even in a room with a minimum area. Among the disadvantages of such a design can be distinguished the difficulty of moving from place to place, because the product is attached to the wall with nails or other strong fixtures, which somehow spoil the appearance of the walls. But it can cause difficulties only when moving, because if the cat is used to sharpen claws in one place, it is unlikely he will look for a new angle.
Article on the topic:
Cat bed with your own hands: how to arrange a place for a pet
The purpose of the product. What species are in demand. Which material to create is better. Instructions for self-manufacturing.
Floor and angular cones for kitten and adult animal
Another version of the claw on the wall is the corner, which is considered an improved version of the previous product. The scratch is set at the protruding angle of two perpendicular to the adjoining walls. The design is flat, which is considered relevant when choosing a product in a small housing. The main advantages are considered compactness and economy, but, as well as the usual wall sharpener, the angular version will be difficult to transfer to a new place. Due to the fact that the protruding corners are chosen by pets, the corner claw will warn the need for unplanned repairs.
There is always an opportunity to supplement the product above with a platform. First, the cat will be interesting to look down on everyone, secondly, the cone will not interfere with cleaning the apartment.
Not all pets like to sharpen their claws on the surface of walls. Some choose carpets or other horizontally installed objects for this purpose.
Such animals should make a floor version of the cone. Considering photos of cnotes (with their own hands made), you can pay attention to such forms of products:
Flat. They are just stacked on the floor boards, covered with sisal. The main advantages are compact size, simple installation and usability.
Convex-concave. The designs have the look of a wave, it allows the cat not only to sharpen the claws, but also to play with the object. This option is somewhat more complex in manufacturing, and it will also require a lot of space to install.
A cone with a toy. Such products are mostly encased with carpet or other suitable material, and at the top fix an artificial mouse. Thus, perform with their own hands toys for kittens, which, frolicking, with pleasure begin to sharpen the claws on the mat fixed at the bottom.
Simple cardboard products. The main advantages of such coileds – a low price and an easy way of making.
Most pets will like the cnowexes, but you should be prepared for the fact that fragments of material will be scattered around the sharpener, and it will have to change 2-3 times a year.
Other cat-khastation options with their own hands: photos
The greatest demand in pet shops are racks for cats in the form of columns with playgrounds. When making yourself, you should carefully approach the choice of the optimal height. Kitten is recommended to choose an option up to 0.5 m, but it should be taken into account that in just 6-8 months the cub will turn into a real adult cat, which will need a product at least 70 cm high.
It’s interesting! The correct height of the claws will allow the kitten to safely perform his favorite sipping, which will help to develop not only the back, but also the joints.
Depending on the planned budget and functionality, you can perform a variety of options, such as:
A pillar with a platform. Economical not only financially, but also in terms of the territory occupied. For the product to last longer, you should not save on the choice of quality rope for the cone.
Corner. It takes quite a bit of space. It has the shape of a semicircle, so that the claw is easy to place in a vacant corner. If necessary, the product can be moved to the right place.
A cone with a house. With your own hands to make the product will be a little more difficult, but as a result, the favorite will get not only a place to play, but also his own lair, where he will feel safe. If the animal is medium-sized, it is enough house standard size (35×35 cm).
Separately, it should be mentioned about large game complexes for animals with two or more levels. Such structures usually consist of such elements:
The house;
beds or hammocks;
Stairs
Tunnel;
hanging toys.
Such complexes are suitable for playful cats, and they are also recommended when the house is home to several animals. In this case, each individual can choose a shelf for themselves, from where it will be convenient to observe what is happening.
Before you make with your own hands a claw with a house for cats, you need to take into account that the assembled design will take up a lot of space, so this option is suitable for large apartments or private houses. It is important to understand that no matter how attractive the product, it should be constantly kept clean, because the cat – the animal is clean. If the clawted will be in an unattractive state, the cat can ignore it.
Basic rules to securely install a claw
Wall and floor products should be properly attached to the surface. If the attachment is weak, then under the influence of the weight of the cat in the process of sharpening the nails the design can fall and scare the animal. There is a high probability that the animal is not only injured, but also will lose interest in the product.
When installing a floor version, too, should be tested for stability, because if the cone is not well enough and is not attached to the floor, the design during the games can move away and unnerve the animal. Top tips for installing a pointof:
As a fastener for hand made from improvised materials cnoxes it is better not to use nails. Self-cutters are considered more reliable, and the design of them will be more stable.
If you have to use nails or braces, you should not do it on the front, because the cat will cling to them and may get hurt. It is best to hide the fastener on the back.
To prevent the process of mold formation and reproduction of pathogens will help laid under the upholstery of mint or cat leaves. In addition, plants are able to attract the attention of the animal.
Wall structures are recommended to perform with two loops located at the corners. In this case, the design will be securely fixed, so that the cat in the process of sharpening will not be able to shift it.
Useful advice! Most tailed prefer to sharpen their claws in the morning after waking up, so it is necessary to install a clawed up near the place where the animal is used to sleeping.
As for other tips on where to install the claw, the owners of animals recommend to do it where the animal blows the surface most often. If it is a protruding corner of the wall, it should be placed and sharpened there. The main thing is not to put the product too close to the surface, because the cat can use both surfaces.
If possible, sharpener should be installed in all places where the pet left traces. Do not advise only for its safety to fasten the sharpening on the door joint, so that the pet accidentally no one pressed.
How to make with your own hands for a cat a claw hanging type
Before you make a claw with your own hands, you need to prepare a piece of plywood or a wooden panel of rectangular shape, the width of which is within 40-45 cm. It is such a distance is enough that the pet does not hurt the wallpaper surrounding the product, when will sharpen the claws. The length of the cap should slightly exceed the height of the animal, standing on the hind legs with the front limbs stretched upwards.
Once a suitable base has been chosen, the material for the upholstery should be determined. The optimal cloth for the cone is considered to be dense corduroy. The size of the material should exceed the dimensions of the prepared rectangle, so that it was possible to wrap the edges and fix them well from the back with the help of construction glue or stapler.
More durable is the sharpening, covered with carpet, turned inside out. For greater strength, experts in the manufacture of such structures advise to fold upholstery in two layers. In addition to the main options, it is also permissible to use a cotton blanket, twine or jute rope for this purpose.
To install on the wall pre-recommend to perform a few holes and attach a claw, using 4 slats of the same size and 8 screws – 4 at the corners and 4 in the center. It is very simple to make a corner claw with their own hands. The step-by-step instruction is as follows:
Take 2 identical pieces of plywood: width – at least 25 cm, height is chosen depending on the height of the pet;
Stick on both blanks cloth or hemp upholstery;
with the help of screws to fix the finished products on either side of the speaker’s corner.
It’s interesting! If you do not have time to make a full clump, you can simply fix on the wall one or more pieces of carpet of the desired thickness and height.
Floor cnox for cats with their own hands: schemes, sizes
Making with your own hands for a cat a cat claw floor type is considered a rational solution, because the product is easy to transfer to any other place, and when it is installed does not need to spoil the walls fastening elements. Moreover, a large range of different models allows you to choose the best option for self-manufacturing depending on the skills and availability of tools.
The easiest option is the usual horizontal ctouchedral, which can play a role and cat bed. To make a piece of plywood or a conventional board, paste it on both sides pieces of carpet, the size of which exceeds a couple of centimeters of the wooden blank. It is necessary to sew both fragments of upholstery among themselves with dense threads, after which the process of making the product is considered complete. If there is a little more time and inspiration, you can try to perform a more complex version of the horizontal sharpener. The step-by-step instruction of the cone with your own hands will look like this:
Prepare rectangular boards (at least 30×60 cm in size).
Nail or twist with self-cutters on each side on a wooden bar of the same size board.
Make sure the fasteners don’t stick out. It is better to make a special deepening for them.
Smear the wooden blank with adhesive composition and wrap with twine, jute or sizzle rope.
You can design with a slight slope to make it form a slide. Two wooden boards will be required for the manufacture, one of which will be longer. This is to create the desired angle of the product.
You can use carpet and other dense fabric for upholstery. You can fix the coating with glue applied to the inside of the material for the tightening. Reliably connect the details with each other will be with the help of furniture corners or tightly twisted self-cutters. To make the structure more stable, it is recommended to fix near the wall.
The chasm of cardboard are quickly made with their own hands. However, it is worth taking into account the significant disadvantage of products – short life. For the homemade will need to prepare such materials:
Dense cardboard
scissors or a stationery knife;
Glue;
Scotch.
A simple step-by-step instruction to claw with your own hands involves such actions:
With any handy cutting tool, cut the sheets of cardboard into strips of the same size.
Alternately twist and paste them among themselves.
As a result of this bonding should be a circle with a diameter of 45-60 cm – here everything will depend on the size of the animal.
To give the product a more attractive appearance, it can be further decorated with a different fabric.
Preliminary before the upholstery on the perimeter should be pasted the product with tape. This will add strength to the cgteredander and extend its use.
Column-cone with their hands: turn-based instructions, photos of various options
This type of sharpening is popular not only among lovers of homemade products, because to make a claw for a cat is quite simple, but also among animals that are happy to use such products. To work, you will need to prepare a sheet of CPD, which will be used as a stand. If this is not available, an old countertop or door of an unnecessary closet will be suitable. The main thing is that the base has sufficient width and was stable – then the beast will not overdo the structure during the game.
As for the shape, you can choose different options: rectangle, square, oval or any other bizarre configuration. It is important that the form gives stability to the sharpening and fits into the surrounding interior. To perform a perfectly round base will be quite simple with the help of a circular, which put a line. Cut best with a jigsaw.
If you want, you can leave the base just wooden, especially if the manufacture used a beautiful natural tree, but you can use any upholstery, because there is a high probability that the animal will look like a product as a sunbed. The base is easy to paste with a jute rope, which is fixed on the side and placed in a spiral, moving to the center.
The column is made of metal or PVC pipes, and a sturdy branch of a tree with a diameter of at least 7-10 cm will come. Some experts suggest making a column of tin cans inserted one into one and connected with glue. To weigh the structure and better stability at the bottom of the first jar should put something heavy, such as a piece of concrete or steel. You can sew all the same carpet or rope. Furniture corners will be suitable to connect the column and the base.
Useful advice! If a wooden column is used, it can be both round and rectangular in the form of a bar. The optimal height is 60-80 cm. More often the surface is left unclosed, but if the column is not too attractive, it is additionally wrapped with a cord.
If desired and the presence of excess material, you can place an additional shelf at the top, which in shape and size corresponds to the base. It is easy to make a three-story structure in which shelves are connected to each other columns. Thus, the lidon for cats is made with their own hands, which is especially relevant for an active animal.
However, in this case, it should be taken into account that when jumping the animal design will be subjected to a significant load. For additional attention, a rope with a toy fixed on it is fixed on top.
Features of creating a house for a cat with a claw
If the ordinary cap seems too simple, you can try to perform the scheme with their own hands claw for cats, consisting not only of a sharpener, but also a full-fledged house and sunbed. Pre-designed detailed plan will help not only to calculate the necessary materials, but also not to make mistakes with measurements in the process of work.
By and large, the process of creating a house with a cat with a claw with its own hands is a few joint workshops, which were previously discussed. Work should also start at the base, where holes are made to install the columns. Then a piece of cloth is pasted on the base, which also prepares holes for pillars.
The house itself can also be used as a base, as a result of which it will be possible to give the structure significant stability. This requires simply pinning several boards between each other to make a square or rectangle. If you install a house at the top, you must either firmly attach the base to the floor, or apply weights for this.
To the surface of the base the pillars are screwed by self-cutters or nailed. Upstairs, it is most often recommended to install an ordinary sunbed, being on which, tailed will be able to observe the situation and hunt. It is important to understand that the more the design of the game complex, the more attention should be paid to the organization of fixing.
Of course, it is much easier to buy a ready-made cegtedra on the market, but in this case there will be no complete certainty that only natural materials were used for its manufacture. With self-execution, you can, firstly, take into account all the preferences of the animal in terms of materials and size, and secondly, to make the claw a real addition of the room. At the same time, you need to understand that even the simplest homemade version will help to protect walls and furniture from sharp clights of the pet.
Features of creating a house for a cat with a claw
If the ordinary cap seems too simple, you can try to perform the scheme with their own hands claw for cats, consisting not only of a sharpener, but also a full-fledged house and sunbed. Pre-designed detailed plan will help not only to calculate the necessary materials, but also not to make mistakes with measurements in the process of work.
By and large, the process of creating a house with a cat with a claw with its own hands is a few joint workshops, which were previously discussed. Work should also start at the base, where holes are made to install the columns. Then a piece of cloth is pasted on the base, which also prepares holes for pillars.
The house itself can also be used as a base, as a result of which it will be possible to give the structure significant stability. This requires simply pinning several boards between each other to make a square or rectangle. If you install a house at the top, you must either firmly attach the base to the floor, or apply weights for this.
To the surface of the base the pillars are screwed by self-cutters or nailed. Upstairs, it is most often recommended to install an ordinary sunbed, being on which, tailed will be able to observe the situation and hunt. It is important to understand that the more the design of the game complex, the more attention should be paid to the organization of fixing.
Of course, it is much easier to buy a ready-made cegtedra on the market, but in this case there will be no complete certainty that only natural materials were used for its manufacture. With self-execution, you can, firstly, take into account all the preferences of the animal in terms of materials and size, and secondly, to make the claw a real addition of the room. At the same time, you need to understand that even the simplest homemade version will help to protect walls and furniture from sharp clights of the pet.
how to remove cat urine smell
remove cat urine odor from carpet
What solutions against cat urine
Cleaner natural against the cat urine
Cat Urine on leather
How protect the birds from cats
How protect the furniture from cats
How to trim your cat nails
Learn how to cut fingernails to a cat
Cat house ways to create a cozy place for an animal
Cat claw the main way to protect the surfaces in the house In the category animal care and control Many people are interested in knowledge and learning about many subjects, this knowledge may be vital at some point in your life, attention enough, and dive into more detail more articles and learn more information about Cat claw the main way to protect the surfaces in the house.