using a set of MASTER KIT ” 4-channel microprocessor-based timer , thermostat , clock » NM8036
I applied a set of NM8036 for heating a country house. I is in the boiler , but the use of a heating circuit for all the floors did not produce a good result : the upper floor was warm (even hot) , on the ground floor and in the basement was much cooler.
I decided to apply the three-loop heating scheme for each floor and separate adjustment of heat supply .
Heating country house
As the heated substance I used the hot water supplied from the boiler for space heating. Total used three independent heating circuits for each floor . Management (open – close) valves that open hot water 65 degrees. With the heating system , carried out by a given program of the microprocessor timer NM8036. DS1820 sensors are mounted on the floor of each floor and in the oven . Channel Five ( and sensor ) prohibits the inclusion of any valves and pumps in the oven until the water reaches a temperature of 65 degrees. S. Sixth Channel Launches circulation pump circuits floor in an oven at a temperature of 65 degrees. C and stops at 30 degrees. With a stove.
Heating country house
- Clean the pool with specialized robot
- Structured mortgage bonds
- Consider the advantages and benefits of underground heating on batteries
- How to properly clean the computer from dust
- straightening hair – Tips for straightening hair
- Where can I buy a cheap car
- Which is better to buy a refrigerator for home
- LG Wave Force Washing Machine Problems
- The detector BOSCH GMS 120 Professional
- Common housing fraud in the real estate market